Recruiting students in the ceramic 3D printing field for jewelry design/production.
Hosted by the Korea Institute of Ceramic Engineering and Technology and organized by 3D Controls, the free in-service training program for ceramic designers currently working in the jewelry industry is now open for applications.
This training will be held on October 11th at the 3D Controls Ceramic Manufacturing Center in Seongnam, Gyeonggi Province. Registration for the program is limited to 10 participants on a first-come, first-served basis until the end of September.
This training program will explore the application of ceramic materials in the production of final products, moving beyond the traditional 3D printing process of producing jewelry masters using plastic materials.
Furthermore, by providing designers and manufacturers with the opportunity to acquire 3D printing techniques using ceramic materials, we anticipate further enhancing the utility of ceramic 3D printing technology in the jewelry industry.
1. Title: Ceramic 3D Printing Technology for Jewelry Designers/Manufacturers
2. Date and Time: Friday, October 11, 2024, 2:00 PM - 6:00 PM (4 hours)
3. Training Location: Seongnam Center M Knowledge Industry Center, 33 Sagimakgol-ro 62beon-gil, Jungwon-gu, Seongnam-si, Gyeonggi-do (Naver Map)
Parking is not covered, so please use public transportation. (Take bus number 55 or 350 from Moran Station (20 minutes).)
4. Training Fee: Free for employees of small and medium-sized enterprises only.
5. Number of Participants: 10 participants, first-come, first-served.
6. Training Application Submission (Email or Fax): Researcher Oh Yu-ji, Korea Institute of Ceramic Engineering and Technology (oug@kicet.re.kr), Fax: 055-792-2796
Training Guide/Application Form (Click the link to download and fill out): [Ceramic Technology Institute] 2024.10.11 Jewelry Ceramic 3D Printing Training Course Guide and Application Form.zip]
7. Training Schedule
| Time | Curriculum
| Location |
Friday, October 11, 2024 2:00 PM - 6:00 PM (4 hours, 1 day)
| Ceramic 3D Printing Technology for Jewelry Design Production (Basic Course) ∙ Introduction to Ceramic 3D Printing Technology (1 Hour) ∙ Understanding the Ceramic 3D Printing Process (1 Hour) ∙ Ceramic 3D Printing Process Practical Training (2 Hours) 
| Gyeonggi-do Seongnam Center MG Knowledge Industry Center Conference Room (12th floor, Zone A)
  |
※ The detailed training content is subject to change depending on the instructor and training site circumstances.
※ Approved participants will be contacted individually. Participants are requested to submit their jewelry design (e.g., smart ring, ring, pendant, etc., measuring approximately 20*20*20mm) using ceramic 3D printing in advance.
. Submission email: jhshin@3dcontrols.co.kr (Please include "Name, Modeling File for Employee Training" in the subject line.)
. Example designs are as follows:
For any further inquiries, please contact the Korea Institute of Ceramic Engineering and Technology (055-792-2779, Researcher Oh Yu-ji) or 3D Controls Co., Ltd. (jhshin@3dcontrols.co.kr, Director Shin Jeong-hyeon).
Thank you.
Recruiting students in the ceramic 3D printing field for jewelry design/production.
Hosted by the Korea Institute of Ceramic Engineering and Technology and organized by 3D Controls, the free in-service training program for ceramic designers currently working in the jewelry industry is now open for applications.
This training will be held on October 11th at the 3D Controls Ceramic Manufacturing Center in Seongnam, Gyeonggi Province. Registration for the program is limited to 10 participants on a first-come, first-served basis until the end of September.
This training program will explore the application of ceramic materials in the production of final products, moving beyond the traditional 3D printing process of producing jewelry masters using plastic materials.
Furthermore, by providing designers and manufacturers with the opportunity to acquire 3D printing techniques using ceramic materials, we anticipate further enhancing the utility of ceramic 3D printing technology in the jewelry industry.
1. Title: Ceramic 3D Printing Technology for Jewelry Designers/Manufacturers
2. Date and Time: Friday, October 11, 2024, 2:00 PM - 6:00 PM (4 hours)
3. Training Location: Seongnam Center M Knowledge Industry Center, 33 Sagimakgol-ro 62beon-gil, Jungwon-gu, Seongnam-si, Gyeonggi-do (Naver Map)
Parking is not covered, so please use public transportation. (Take bus number 55 or 350 from Moran Station (20 minutes).)
4. Training Fee: Free for employees of small and medium-sized enterprises only.
5. Number of Participants: 10 participants, first-come, first-served.
6. Training Application Submission (Email or Fax): Researcher Oh Yu-ji, Korea Institute of Ceramic Engineering and Technology (oug@kicet.re.kr), Fax: 055-792-2796
Training Guide/Application Form (Click the link to download and fill out): [Ceramic Technology Institute] 2024.10.11 Jewelry Ceramic 3D Printing Training Course Guide and Application Form.zip]
7. Training Schedule
Friday, October 11, 2024
2:00 PM - 6:00 PM
(4 hours, 1 day)
Ceramic 3D Printing Technology for Jewelry Design Production
(Basic Course)
∙ Introduction to Ceramic 3D Printing Technology (1 Hour)
∙ Understanding the Ceramic 3D Printing Process (1 Hour)
∙ Ceramic 3D Printing Process Practical Training (2 Hours)
※ The detailed training content is subject to change depending on the instructor and training site circumstances.
※ Approved participants will be contacted individually. Participants are requested to submit their jewelry design (e.g., smart ring, ring, pendant, etc., measuring approximately 20*20*20mm) using ceramic 3D printing in advance.
. Submission email: jhshin@3dcontrols.co.kr (Please include "Name, Modeling File for Employee Training" in the subject line.)
. Example designs are as follows:
For any further inquiries, please contact the Korea Institute of Ceramic Engineering and Technology (055-792-2779, Researcher Oh Yu-ji) or 3D Controls Co., Ltd. (jhshin@3dcontrols.co.kr, Director Shin Jeong-hyeon).
Thank you.