We are offering a free 3D printing service now! Get in touch!
Material Overview
Metals
About Ceramics
Metal Powder
Metal powders for 3D printing are widely used in the aerospace field in addition to the manufacture of
vehicle electronic material parts. High-intensity and purity, Our Metal Powder delivers high-purity and high-quality
technology. The 3DMETAL-M1 series including aluminum, titanium, and copper, delivers the best performance.
Material 01
| Metal Slurry | |
| Solids loading [vol%] | 45 ~ 54 |
| Viscosity 1 [Pa·s] | 1.8 ~ 15 |
| Sintered Metal | |
| Theoretical density [g/cm³] | 6.05 |
| Relative density [%] | 99.5 |
| Porosity [%] | 0.5 |
| 3 point bending strength [MPa] | 600 ~ 950 |
Materials Under Development ···
*¹ Value was determined at a constant shear-rate of 50 s-1 at 26°C
| Alumina Slurry | Si₃N₄ | ATZ | Y₂O₃ |
| Solids loading [vol%] | 40 ~ 50 | 45 ~ 54 | 45 ~ 54 |
| Viscosity 1 [Pa·s] | 2 ~ 50 | 1.8 ~ 15 | 1.8 ~ 15 |
| Sintered Alumina | Si₃N₄ | ATZ | Y₂O₃ |
| Theoretical density [g/cm³] | 3.17 | 5.0 ~ 5.6 | 5.01 |
| Relative density [%] | 98.5 ≤ | 99.0 ≤ | 99.2 ≤ |
| Porosity [%] | 0.2 ~ 1 | 0.2 ~ 1 | 1 ~ 0.2 |
| 3 point bending strength [MPa] | 600 ~ 780 | 1,100 ~ 1,800 | 120 ~ 180 |
개인정보 보호 책임자: 이상규 (sales@3dcontrols.co.kr, +82 51-972-6986)
ⓒ Copyright by 3D Controls Inc. 2025. All Right Reserved.
